![]() ![]() Here is a list of Cisco IOS products capable of running CUBE. The customer should choose a Cisco IOS gateway model based on the capabilities and the capacity that will be required based on the planned network deployment. Features tested are basic call, 3-way (ad-hoc) conference, call transfer (attended and unattended), call forward (all, busy and no answer), hold/resume, and DTMF internetworking.ĭuring testing a Cisco 3825 voice gateway was used as the DSP farm point (MTP, Conference bridge), however other Cisco voice gateways can be used and the decision to choose what Cisco gateway model to use is left to the customer. The network topology diagram (Figures 1) shows the test setup for end-to-end interoperability between Cisco Unified Communications Manager Release 7.0 and the Aastra MX-One (Ericsson MD110) PBX using SIP trunks via IP connectivity. This application note describes the necessary steps and configurations for connectivity between an Ericsson (Aastra) MD110 (MX-One) Version 3.2 SP1 and a Cisco Unified Communications Manager (CUCM) 7.0 with SIP trunks. can be found on of 48 EDCS# 763031 Rev# 3 Important notices, privacy statements, and trademarks of Cisco Systems, Inc. 7 Configuring the Cisco Unified Communications Manager. 6 Features Not Supported (See limitations). Aastra MX-ONE (Ericsson MD110) version 3.2 SP1 using SIP trunk to Cisco Unified Communications Manager 7.0 April 6th 2009, Initial Version Table of Contents Introduction. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |